SC7B Longruner 7 Inch Monitor Touch Screen Display TFT LCD H
For Raspberry Pi Touch Screen, Longruner 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 1024*600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems
Capacitive touch control and has vertical and Horizontal image flip function. Image 4: 3/ 16: 9 display format conversion.
Operating voltage: 12V 1a power supply current requirements within the above 2a, on board 400mA DC-DC Boost Regulator to provide power supply to LCD backlight.
Support 864 x 480 x 24bit Graphics content through SSD1963 controller. It also equips parallel MCU interfaces in different bus width to receive Graphics data and command from MCU. Its display interface supports common ram-less LCD driver of color depth up to 24 bit-perpixel. Warning: all data port voltage can not exceed 3.6V.
Supports BB black, comes with related images like: Angstrom. And also supports banana Pi/banana Pro, comes with related images like: lubuntu, Raspbian.
We provided CD Disk with related driver and source code to you, If you are unsure about any of the technical issues.Please contact us freely.
LCD Size: 7.0 inch (Diagonal)
Driver Element: A-Si TFT active matrix
Display mode: Normally White ,Transmissive
High Resolution: 1152,000 Dots (800 x 3(RGB) x 480)
SSD1963 touch panel controller
Dot pitch: 0.0642(W) X 0.1790(H)mm
Active Area: 154.08(w)X 85.92(H)
Module Size: 164.9(w)X100.0(H)x5.7(D)mm
Surface Treatment: Anti-glare
Color arrangement: RGB-Stripe
Blacklight: Highlighted LED lamp backlighting
TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin's voltage on the module
Can not be more than 3.3V.
Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V.